Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy Newport News Homeowners Choose Ghost Controls Gate Repair
We provide independent Ghost Controls gate repair, service and installation across Newport News, VA. What sets our Ghost Controls work apart is that we go straight to the actual fault on your operator, the battery, the solar charge, the limit switches, the control board, instead of guessing at it. We’re an independent service provider, not a Ghost Controls dealer, and we’re not affiliated with or authorized by the manufacturer. We know the equipment because we work on it.
Newport News is a shipyard town, and that shapes gate work here in ways inland Hampton Roads cities don’t see. The yards, warehouses and contractor lots along the James River waterfront run heavy steel rolling and cantilever gates that take salt-air corrosion and constant truck traffic. Ghost Controls swing operators turn up on plenty of residential driveways too, on gates that were hung decades ago and have settled into the region’s soft, sandy coastal soil. Call us at (866) 620-2654 for a free estimate.
Why Trust Gate Repair Newport News for Your Ghost Controls Gate Repair?
Ghost Controls makes solar and AC swing gate operator kits, the kind of equipment that shows its faults in patterns. Our technicians have up to 14 years of experience and have learned those patterns on real installations: a 12V battery that no longer holds a charge, a solar panel shaded by a crepe myrtle or wired with reversed polarity, a limit switch that has drifted a quarter inch and now makes the gate reverse before closing. We read the symptom, then confirm the cause with a meter and a manual cycle before touching a part.
We use quality parts that fit Ghost Controls equipment. Where fit and availability allow, that means Ghost Controls boards, arms, batteries and limit switches; when OEM parts are back-ordered, we’ll tell you plainly and offer a quality aftermarket battery, keypad or remote as an honest substitute, never a mystery part. Our work is warranty-safe: we don’t cut harnesses, bypass safety edges or remove a manufacturer’s safety features to make a gate run, because that’s how a warranty claim gets denied. Every price is written down and agreed before we start. Call (866) 620-2654.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Fix in Newport News
These are the Ghost Controls failures we diagnose most often in Newport News, and the reasons behind them:
- Battery and solar-charge failure. The gate slows, stalls mid-travel, or beeps and refuses to run. This is the single most common cause on AXS and ADX operators: the 12V battery has aged out and no longer holds a charge, or the solar panel is shaded, dirty, or wired with reversed polarity so it never actually charges. Owners often assume the motor is dead when the battery is the whole story.
- Limit-switch and arm-position drift. The gate stops short, reverses before closing, or strains against a hard stop. After the arm bracket shifts or the limits creep, the operator loses its travel reference point. It’s a realignment job, not a motor replacement.
- Control-board and accessory faults. Remotes stop pairing, the keypad or intercom has no power, or the board resets on its own after a voltage spike or a wet connector. Tidewater’s muggy summers and nor’easters push moisture into outdoor enclosures, which is where a lot of board trouble starts.
- Mechanical hinge, post and arm wear. A sagging gate drags the operator arm, rusted hinges bind, and a loose post lets the arm or rack misalign. Salt air off the James keeps every steel hinge and latch on a corrosion clock, so this comes back around on older Newport News properties.
- Charging and accessory wiring pitfalls. A keypad wired to the wrong terminal, a second accessory added in parallel, or a remote paired to the wrong channel can leave a working operator behaving as if it’s broken. We trace the wiring before we condemn anything.
A typical Ghost Controls AXS or ADX swing gate starts stalling halfway and beeping, and the homeowner assumes the motor is dead. A qualified tech usually finds a weak 12V battery or a solar panel that is no longer charging, then checks the limit switches and arm brackets for drift before condemning the control board. The fix is often a battery, a charging check, and a limit and arm realignment rather than a new operator.
Ghost Controls Parts & Our Repair-vs-Replace Approach
Choosing the right part is half the diagnosis. We fit Ghost Controls OEM boards, arms, batteries and limit switches where fit and availability allow, and we’ll be straight with you when a quality aftermarket battery, keypad or remote is the honest choice because an OEM part is back-ordered. We don’t claim to stock Ghost Controls parts; we source what fits your operator.
On repair versus replace: repair is usually the right call when the gate is sound and the operator is healthy apart from one fault. Replace the operator when the control board and the motor are both gone and the gate frame or hinge geometry is the real culprit, because a new operator bolted to a binding gate will fail the same way. We’ll tell you which situation you’re in before any work starts. Call (866) 620-2654 for a free estimate.
Our Ghost Controls Service Process – Step by Step
- 1
Diagnosis. We read the operator’s behavior, check battery voltage and solar output under load, trace accessory wiring, and cycle the gate by hand to feel for hinge drag or post movement. On Ghost Controls equipment the symptom usually points straight to the fault once you check charging and travel limits in order.
- 2
Repair or install. We quote the fix in writing, then replace the battery, realign limits and arms, or swap the board or motor as needed. On installation we set the operator to the correct arm geometry and run accessory wiring cleanly.
- 3
Test. We cycle the gate through full travel, check the safety reverse and obstruction response, confirm the solar or AC charge is holding, and re-pair remotes and keypad so everything works together.
- 4
Warranty. We leave you with what was done and what to watch, and we keep our work warranty-safe by leaving the manufacturer’s safety features intact. If a fault returns, call and we’ll look again.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Products We Service & Install in Newport News
We service and install the Ghost Controls equipment local owners actually run: the AXS Series single-swing operator kits (AXS1, AXS2, AXS3), the ADX Series dual-swing operator kits (ADX1, ADX2, ADX3), and the TubeGate tube-frame operator systems. We also work on solar and AC/DC swing gate opener kits along with the keypad and remote accessories that go with them. That covers electric gate repair, battery backup and motor repair on all of it. Whether your operator is a single-leaf driveway gate or a dual-swing entrance, we handle the repair and the install on the same equipment, so a property’s needs don’t send you looking for a second contractor. Call (866) 620-2654.
We Also Service These Brands
Ghost Controls is one line in a broader repertoire. We also service LiftMaster, Mighty Mule and DoorKing, along with FAAC, BFT, Linear, Viking and Elite, spanning residential openers to harder-to-find commercial-grade systems. That range means a legacy or obscure operator on your property doesn’t stall you in a sourcing hunt. One call puts you with a tech who recognizes the brand on your gate.
FAQs – Ghost Controls Gate Repair Service in Newport News
No. We’re an independent Ghost Controls service provider, not a dealer and not affiliated with or authorized by the manufacturer. We work on Ghost Controls equipment because we know it, not under a factory agreement. That means our diagnosis is based on the actual failure, not a sales script. Call (866) 620-2654 for a free estimate.
Yes. We fit Ghost Controls OEM boards, arms, batteries and limit switches where fit and availability allow, and offer quality aftermarket batteries, keypads and remotes as honest substitutes when OEM is back-ordered. We don’t claim to stock Ghost Controls parts; we source what fits your operator. Call (866) 620-2654 and we’ll talk through what your gate needs.
Most Ghost Controls repairs, a battery, a charging check, a limit and arm realignment, are done in a single visit once we’ve confirmed the cause. Board or motor replacements and full installations take longer because parts have to be sourced and the work scheduled. We’ll give you the timing with the written estimate. Call (866) 620-2654 to book it.
We cover the AXS Series single-swing kits, the ADX Series dual-swing kits, TubeGate tube-frame systems, and the solar and AC/DC swing opener kits with their keypad and remote accessories. That means electric gate repair, battery backup and motor repair on all of them. Call (866) 620-2654 if you’re not sure which one you have.
Our work is warranty-safe because we don’t cut harnesses, bypass safety edges or remove the manufacturer’s safety features to force a gate to run. Those shortcuts are what get warranty claims denied. We leave the equipment as the manufacturer designed it. Call (866) 620-2654 with questions about your setup.
It depends on the fault: a battery and charging check costs far less than a control-board or motor replacement, and we quote it in writing before any work starts. The written estimate sets the final price. Call (866) 620-2654 for an exact quote, estimates are free.
Book Your Ghost Controls Service in Newport News, VA
If your Ghost Controls operator is beeping, stalling or refusing to close, we’ll find the real cause and fix it, and we’ll quote the price before we start. Call (866) 620-2654 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Newport News.