Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Newport News Homeowners
A gate that won’t open, won’t latch, or drags along its track changes how you use your property every single day. Whether it’s a driveway swing gate stuck half-open or an iron pedestrian gate that no longer lines up with its strike, the fix is rarely a guess. Our technicians have up to 14 years of experience, we answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday, so most Newport News gate problems get a same-day visit. We work on manual and electric systems alike, and we’re fluent in LiftMaster, FAAC, Mighty Mule, Elite and more. Call (866) 620-2654 to book a free estimate and get a written price before any work starts.
Driveway Gate Repair
Driveway Gate Repair is the work that keeps the main entry to your property swinging or sliding the way it should. You need it when the gate sags, scrapes the ground, moves unevenly, or stops responding to the operator. We handle everything from hinge and latch adjustment to operator faults and control board diagnosis. A typical driveway gate repair in Newport News runs $180-$550 depending on whether the fault is mechanical, electrical, or both. The written estimate sets the final price, and we quote and agree it before any work starts. Call (866) 620-2654 for a free estimate on your driveway gate.
Sagging and Out-of-Square Gates
A gate that sags is usually telling you its hinges have worn, its posts have shifted, or its frame has pulled out of square. Left alone, that misalignment puts stress on the operator and shortens its life. We check the posts, hinges, and frame together so we fix the cause, not just the symptom.
Operator and Remote Faults
When a driveway gate opens by remote but won’t close, or a keypad entry stops working, the fault often lives in the control board, the safety sensors, or the limit switches. We test each component to isolate the problem before we recommend a repair. That saves you from replacing parts that were fine all along.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding
Gate Welding is the metalwork that repairs cracked frames, broken hinge mounts, and failed welds on a gate that has taken years of stress. You need it when a joint has split, a hinge has torn loose, or a post bracket has rusted through. We weld the repair in place where possible and reinforce the surrounding structure so it holds. Gate welding in Newport News typically runs $150-$400 depending on the size of the repair and how much metal needs to be rebuilt. The free estimate includes a look at the whole frame so the final quote is written and agreed before we start. Call (866) 620-2654.
Structural Frame Repairs
Collapsed corners and torn hinge plates are structural problems, not cosmetic ones. We rebuild those joints with proper penetration welds and check the rest of the frame for related stress. A frame repaired this way stays square through daily use.
Post and Hinge Mounts
Hinge mounts are where most gate failures start, because that’s where all the moving weight lands. When we weld a hinge back on, we reinforce the mount and confirm the post can carry the load. Skipping that step just moves the failure a few inches down the post.
Commercial Gate Repair
Commercial Gate Repair covers the higher-cycle systems that keep a business, HOA, or managed property moving people and vehicles in and out. You need it when a barrier arm sticks, a slide gate cycles unreliably, or an access control system stops recognizing its loop detectors. We service commercial-grade operators including DoorKing, FAAC, and LiftMaster, and we diagnose the whole system: motor, control board, loops, and safety edges. Commercial gate repair in Newport News typically runs $250-$800 depending on the operator and the fault. The written estimate sets the final price, quoted and agreed before any work begins. Call (866) 620-2654.
High-Cycle Operator Service
Commercial operators cycle dozens of times a day, so wear shows up faster on the motor, gears, and limit switches. We service those components as a unit rather than swapping one part at a time. That reduces repeat callbacks and keeps the gate running through the workday.
Access Control and Loop Detectors
When a gate stops reading vehicles or keypads, the fault can sit in the loop, the detector, or the control board behind them. We test each in turn so the repair lands on the part that actually failed. Loops that have been cut by paving or traffic get replaced cleanly.
Iron Gate Repair
Iron Gate Repair is the work that restores strength and alignment to solid iron gates that have loosened, warped, or seize up at the hinges. You need it when an iron gate no longer meets its latch, drags on the ground, or feels loose in its posts. We service manual and electric iron gates, checking the frame, hinges, posts, and operator connection together so nothing gets missed. Iron gate repair in Newport News typically runs $180-$500 depending on the repair. That’s estimated, and the final price comes from the written estimate we agree before any work. Call (866) 620-2654 to book a free estimate.
Hinge and Pivot Realignment
Iron gates carry a lot of weight, and their pivots and hinges take the brunt of it. When a pivot wears out, the gate drops and stops meeting its strike. We realign the pivot and reinforce the mount so it holds the gate’s weight again.
Latch and Strike Alignment
A latch that won’t catch or a strike that won’t line up usually points to a shift somewhere else in the frame. We trace the misalignment to its source and correct it rather than forcing the latch. That keeps the gate latching cleanly every time it closes.
Sliding Gate Repair
Sliding Gate Repair fixes the track, rollers, and operator faults on gates that run sideways instead of swinging. You need it when a slide gate jumps its track, grinds along the rail, or stops partway open. We inspect the track, rollers, guide posts, and operator as one system, because a slide gate that comes off its track usually has more than one fault behind it. Sliding gate repair in Newport News typically runs $200-$600 depending on the cause. The estimate is free, and the written quote comes before any work is scheduled. Call (866) 620-2654 for a fast look at your slide gate.
Track and Roller Service
Sliding gates ride on rollers along a track, and worn rollers are the most common cause of a gate that jumps. We replace or adjust the rollers and check the track for bends or debris buildup. A level, clear track keeps the gate tracking where it should.
Off-Track and Derailment Fixes
A slide gate off its track is a safety concern as well as a mechanical one, because a heavy panel can swing loose. We don’t advise forcing it back onto the rail yourself. Our technicians re-seat the gate safely and inspect the guide posts and operator for related damage.
Wrought Iron Gate Repair
Wrought Iron Gate Repair restores ornamental gates that have lost alignment, rusted joints, or seized hinges, keeping both their look and their function. You need it when a decorative gate hangs loose, has broken pickets, or won’t close flush. We weld or replace damaged sections, treat surface rust, and realign the frame so the gate swings true. Wrought iron gate repair in Newport News typically runs $180-$550 depending on the scope, and the written estimate sets the final price before any work. Call (866) 620-2654 to get a free estimate.
Ornamental Detail Restoration
Wrought iron carries decorative detail that plain iron doesn’t, so repairs need to match the original pattern. We match pickets, scrollwork, and finials where they can be sourced and blend the new work with the existing gate. That keeps the gate looking whole rather than patched.
Rust Treatment and Protective Finish
Rust spreads quickly once it takes hold at a joint or weld, and it weakens the metal underneath. We clean the affected areas, treat the rust, and apply a protective finish that slows it down. Treating rust early stops a small repair from becoming a frame rebuild.
Metal Gate Repair
Metal Gate Repair handles gates built from aluminum, steel, and other metals, fixing bent frames, worn hardware, and seized moving parts. You need it when a metal gate has taken an impact, lost its alignment, or developed movement at the hinges. We straighten or replace damaged sections, service the hinges and latches, and check any operator attached to the gate. Metal gate repair in Newport News typically runs $150-$500 depending on the metal and the damage. The price is estimated, and the written estimate we agree sets the final amount. Call (866) 620-2654 for a free estimate.
Impact and Bent-Frame Repair
A vehicle or a heavy gust can bend a metal gate enough to break its alignment. We assess whether the frame can be straightened or a section needs replacing. Either way, we confirm the gate lines up with its posts and latch when we’re done.
Hardware and Hinge Replacement
Metal gates wear at the hinges and latches where the moving parts meet. Worn hardware lets the gate sag or fail to catch. We replace the failing hardware and check the mount points so the new parts hold.
Wood Gate Repair
Wood Gate Repair addresses the sagging frames, broken boards, and loose posts that wood gates develop over time. You need it when boards have split, the gate has dropped at the latch side, or the frame has loosened in its posts. We replace damaged boards, reinforce or reset the frame, and realign the gate with its latch. Wood gate repair in Newport News typically runs $150-$450 depending on the number of boards and the frame condition. The written estimate sets the final price before any work. Call (866) 620-2654.
Board Replacement and Frame Repair
Individual boards that have split or rotted can be swapped without rebuilding the whole gate. When the frame itself has loosened, we reinforce the joints or reset the frame so the gate hangs square. Both approaches keep a sound gate from being replaced before its time.
Sagging and Latch Alignment
A wood gate that sags at the latch side has usually lost its structural support somewhere else. We look for failing hinges, a leaning post, or a frame that’s pulled out of square. Correcting the cause keeps the gate latching cleanly through the seasons.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We service LiftMaster operators and know where they wear, from the drive gears to the safety reverse. LiftMaster is common on residential driveways, and familiarity with its control systems saves diagnostic time. We service FAAC equipment as well, including swing and slide operators, and we know the typical fault points in each. Whether it’s a FAAC system on a commercial entry or a LiftMaster on a neighborhood driveway, we diagnose before we recommend.
We also service Mighty Mule and Elite systems, plus Linear, BFT, Viking, Ghost Controls, and DoorKing. From motor to control board, we cover the parts that fail most often. We’re an independent gate specialist, not a dealer or a brand-specific rep, so we work on the system you already own. Whether you have Mighty Mule, Elite, or any other make, we can help.
Signs You Need a Pro Right Now
- The gate opens or closes unevenly. A gate that moves at an angle, or scrapes along one side, usually has a hinge, post, or track problem that gets worse under an operator’s force. A technician can find the cause before it damages the frame.
- The operator runs but the gate doesn’t move. A motor that hums with no movement points to a gear, limit, or control board fault. Continuing to cycle the operator in that state can burn it out. This is a call a technician needs to make, not a part swap to guess at.
- The gate stops or reverses halfway. A gate that stops short or reverses itself often has a misaligned safety sensor or a limit switch out of adjustment. That safety behavior is what protects people and vehicles, so it needs setting by a trained hand.
- A slide gate has come off its track. Heavy sliding panels that leave the track can tip or swing loose, which is a serious safety issue. Don’t try to force it back yourself; call us and we’ll re-seat it safely.
- Visible cracks, rust-through, or broken welds. A frame that’s cracked or rusted through has lost strength and can fail under load. Structural repair restores it before it lets go entirely.
Our Process, Step by Step
- 1
We start with a phone call and a few questions about the gate type, its age, and what it’s doing. That helps us arrive with the right diagnostic tools and the most likely parts in mind. For electric gates, we ask about the operator brand.
- 2
On site, we inspect the gate as a system: frame, hinges, posts, track, and the operator if there is one. We test limit switches, safety sensors, and control board faults with diagnostic equipment. This is the step that separates a real repair from a parts guess.
- 3
We go over what we found and what it will take to fix it, in plain terms. You get a written estimate, and we agree the price before any work starts. Nothing gets billed that you haven’t seen and approved.
- 4
We complete the repair, then test the gate through several full cycles. We check the safety sensors and limits on every electric gate before we call it finished. That confirms the repair holds under normal use.
- 5
We walk you through what we did and how to keep the gate moving smoothly. If a worn part will need attention later, we’ll tell you now. One call, the right tech, and a clear report when the work is done.
How Much Does Gate Repair Cost in Newport News?
A typical driveway gate repair in Newport News runs $180-$550 depending on whether the fault is hardware or the operator. Sliding gate repair usually falls in the $200-$600 range, gate welding in the $150-$400 range, and metal or wood gate repair can land anywhere from $150 to about $500. Wrought iron and iron gate repairs sit in the $180-$550 range, while commercial gate repair runs wider, from $250 to around $800, because high-cycle operators and access control systems take longer to diagnose. Those are estimates, and the written estimate sets the final price for your gate.
What moves the price is the gate type, the operator brand, and whether the problem is mechanical or electrical. A hinge that needs realigning is a smaller job than a control board plus loop detector fault. To avoid overpaying, get a written estimate before work starts and make sure it covers diagnosis, part, and labor. Our free estimate includes an on-site look at the whole gate so we can quote the real fix, not a placeholder number. Call (866) 620-2654 for an exact quote, and please note the price is agreed before any work begins.
Our Service Area Near Newport News
We handle gate repair across Newport News and the towns around it, including Gloucester Courthouse, Hampton, Norfolk, Claremont, Mathews, Gwynn, Waverly, Sedley, and Deltaville. Response depends on how close you are to Newport News, and we schedule each job in the order requests come in. If you’re nearby, same-day service is often possible for a repair. For gate repair in a neighboring town, call us and we’ll get you on the schedule.
Serving Newport News, VA – Our Local Coverage Area
We serve Newport News and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Newport News
Gate repair is the work of fixing a gate that no longer opens, closes, latches, or moves safely, covering the frame, hinges, posts, hardware, and the operator on an electric system. It includes diagnosis of control boards, limit switches, and safety sensors as well as the metal or wood structure. Our technicians have up to 14 years of experience on manual and electric gates. Call (866) 620-2654 for a free estimate.
Most gate repairs take between one and three hours once the technician is on site, depending on the fault. A hinge or latch adjustment is faster, while an operator fault or welding repair takes longer. We give you a time estimate with the written quote so you know what to expect. Call (866) 620-2654 to book.
Gate repair in Newport News typically runs $150-$800 depending on the gate type and the fault, with most common repairs landing in the $180-$550 range. Commercial operators and access control faults sit at the higher end. The written estimate sets the final price, and we agree it before any work starts. Call (866) 620-2654 for an exact quote, and estimates are free.
Yes, we service LiftMaster gate operators, along with FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We know where each brand tends to wear and how its controls behave. Being an independent specialist means we can work on the system you already own rather than pushing a replacement. Call (866) 620-2654 to describe what your operator is doing.
Same-day service is often possible for gate repairs in Newport News. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (866) 620-2654 and we’ll tell you the soonest we can be there.
We stand behind our work and want the repair to hold, so ask about our warranty terms when you call and we’ll confirm what’s covered on your specific repair. We’re licensed and insured, and we don’t leave a gate until we’ve tested it through several cycles. Getting the terms in writing up front keeps the whole job clear. Call (866) 620-2654 to ask.
Clear the area around the gate so the technician can reach both sides safely, and move anything parked in the gate’s path. Note the operator brand and model if you can, and jot down what the gate does and when. If you have the manual, have it handy. For a full picture of what we cover, see our Gate Repair Newport News page, then call (866) 620-2654 to book.
Schedule Your Gate Repair Service in Newport News Today
Don’t wait on a gate that’s sticking, sagging, or failing to close properly, because small faults grow into bigger repairs. Call (866) 620-2654 for a free, no-obligation estimate on gate repair in Newport News. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We quote and agree the price before any work starts, so there are no surprises. Reach out today and we’ll get your gate moving smoothly again.
Written by the team at Gate Repair Newport News.