Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mathews, VA
Mathews is tidewater country: long gravel and shell driveways, waterfront lots, farmsteads, and timber gates that take a beating from salt air and storm wind. Gate installation here is rarely an off-the-shelf job. A driveway that runs 300 feet off a rural route needs a gate sized, hung, and powered for that exact opening, and a wooden pasture gate on soft wet ground needs posts set correctly or it will sag again by spring. We install swing, slide, and barrier gates and we service what we install. Call (866) 620-2654 for a free estimate.
Why Mathews Homes Are Different
Mathews County is rural and low-lying, and the housing stock shapes the gate work. Most properties are single-family detached homes – older farmhouses, waterfront and second-home places, rural ranches – with long private driveways, detached garages, and outbuildings. That means gates here are typically wide timber or tube-frame driveway gates plus pasture and farm gates, not the dense suburban yard gates you’d see in a subdivision. Openings are wider, spans are longer, and the gate often carries more weight than a standard operator is set up for.
The climate does the rest. Humid subtropical summers, salt-laden air off the Chesapeake, nor’easters, and hurricane-season storms all push wood rot, rust, and hardware corrosion along faster than inland. Wind events are the main cause of bent gates, failed hinges, and operators knocked out of alignment. The ground itself is a factor. On the county’s gravel and shell driveways, wet soil lets posts shift, and a long timber gate that dragged fine in July will twist and bind after a winter blow.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Mathews Services
Two jobs come up more than any other on Mathews properties: getting a failing gate back to working order, and putting in a new one that suits the opening. Each has its own page.
Gate Repair in Mathews
Most repair calls in Mathews start the same way: the gate won’t latch or swings open after a storm. Often the gate itself is sound and the posts have moved in soft, wet ground, so the fix is resetting posts and re-hanging rather than replacing timber. Rot and warp on heavy wooden gates are the other common job, along with hinge and hardware corrosion from salt air. We handle Gate Repair in Mathews for driveway, pasture, and tube-frame gates, and we assess the whole assembly before recommending a fix.
Electric Gate Repair in Mathews
When a gate stops responding, the fault is usually in the operator, not the gate. Control boards, loop detectors, limit switches, and operator motors are where we spend our time, and we’re fluent across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Coastal humidity and power interruptions take a toll on older boards, and legacy systems are common on second-home properties. For Electric Gate Repair in Mathews, we diagnose the operator and the wiring together, because the two fail in tandem.
Gate Installation in Mathews
Installing a gate in Mathews means matching the gate to a long rural driveway and to a climate that attacks wood and metal year-round. Most properties here have wide openings, soft ground, and salt air, so we size the gate, set the posts to proper footing depth, and choose hardware that holds up to tidewater humidity. Whether you want a manual timber driveway gate or a fully automatic slide gate, we measure the opening on-site and write a firm price before any work starts. You can see the full scope of what we offer on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re tired of getting out to open a long driveway gate in the rain, or the existing manual gate has become too heavy to swing reliably.
What it costs in Mathews
Automatic gate installation in Mathews typically runs from about $2,800 to $7,500 depending on gate size, operator brand, and whether a power run is needed, with the written estimate setting the final price.
How we do it
We measure the opening, set posts to proper footing depth, hang the gate, mount and wire the operator, install safety edges and loop detectors, and test the full cycle before we leave.
Driveway Gate Installation
Signs you need it
The old gate has rotted at the joints, drags on the ground, or the posts have shifted so far in wet soil that no adjustment will hold it true.
What it costs in Mathews
A new driveway gate in Mathews usually lands between about $1,900 and $5,200 for the gate and hanging, with operators and power runs priced separately in the estimate.
How we do it
We clear and check the opening, set new posts to proper footing depth, build or hang the gate to fit, fit hardware rated for coastal conditions, and confirm it latches and swings clean through its full travel.
What Gate Installation Costs in Mathews
| Item | Typical range in Mathews |
|---|---|
| New driveway gate, installed | $1,900 – $5,200 |
| Automatic gate with operator | $2,800 – $7,500 |
| Post reset and re-hang | $350 – $900 |
Do I need a permit to install a gate in Mathews?
Usually not for a gate itself, but check with Mathews County before work starts, especially if the gate sits near a road, a shoreline buffer, or a shared HOA entrance. We’ll tell you what we’ve seen on similar properties.
Can you install a gate on a long gravel driveway?
Yes. Long rural driveways are the norm here. We set posts to proper footing depth for the soil and span, and we size the gate and operator to the actual opening rather than a standard width.
Brands We Service in Mathews
We work on Elite, Mighty Mule, LiftMaster, FAAC, and the other major operator brands, both common residential units and harder-to-find commercial-grade systems. We don’t claim to stock parts locally; if a board or motor has to be ordered, we’ll give you a realistic timeline up front. See our brands for the full list.
Pricing for Gate Company in Mathews, VA
| Service | Typical range in Mathews |
|---|---|
| New driveway gate, installed | $1,900 – $5,200 |
| Automatic gate with operator | $2,800 – $7,500 |
| Post reset and re-hang | $350 – $900 |
| Manual gate repair | $180 – $650 |
| Hinge and hardware replacement | $150 – $500 |
| Electric gate diagnostic and repair | $200 – $800 |
| Control board replacement | $350 – $950 |
| Operator motor replacement | $600 – $1,800 |
| Loop detector or safety edge repair | $250 – $700 |
| Slide gate installation | $2,200 – $6,000 |
In Mathews, price climbs with gate span, timber weight, how far the power run has to travel, and how much rot or post work turns up once we open the ground. We quote and agree the price before any work starts, and the written estimate is what you pay.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Mathews
We cover gate work across Mathews County, from the courthouse village out along the rural routes and waterfront lanes. Response is straightforward across the county; on the more remote waterfront lots, give us a landmark and we’ll find you. Areas we regularly work in include:
- Mathews (23109)
- Port Haywood
- Moon
- Bohannon
- Cobbs Creek
Service Area – Cities Near Mathews
Mathews sits on the Middle Peninsula, and we serve the surrounding communities as well as the county itself. If your property is just outside Mathews, we can still help. We cover Gwynn, VA, Deltaville, VA, Gloucester Courthouse, VA, and Newport News, VA.
Serving Mathews, VA – Our Local Coverage Area
We serve Mathews and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mathews
We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. For a gate that won’t close or won’t latch, call (866) 620-2654 and we’ll book the next available opening; a call outside dispatch hours goes into the next slot.
Yes, for homeowners, HOA managers, and small commercial property owners. A rural gate on soft ground and a shared HOA entrance need different posts and different operators, and we’ll assess which you have before quoting.
No. Mathews is our home base for this page, but we also cover the surrounding Middle Peninsula and Newport News. Ask about your address when you call, and we’ll confirm coverage.
Contact Us for Gate Work in Mathews
Whether your timber gate is dragging after a nor’easter or you’re ready to install an automatic driveway gate on a long rural drive, call (866) 620-2654 for a free estimate. We quote and agree the price before any work starts. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Mathews Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Tiana Whitfield"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Latoya Freeman"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Emily Yang