Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Norfolk, VA
Norfolk properties sit on tidal water, in historic districts, and beside military bases, and each of those settings puts different demands on a gate. We install driveway, sliding, and automatic gates for Norfolk homeowners, HOA managers, and light-commercial property owners, and we work on the nine major operator brands rather than farming the job out to whoever answers first. If you’re pricing a new gate, call (866) 620-2654 and we’ll set up a free measure and a written estimate. Our technicians have up to 14 years of experience, and every job here starts with the salt air, the soil movement, and the gate type already on your property.
Why Norfolk Homes Are Different
Salt-laden air off the Chesapeake and the rivers running through the city is hard on metal. Wrought iron and chain-link gates that have stood in Ghent or Colonial Place for decades rust from the inside of the joints before the surface shows it, and once rust gets into a hinge or a post anchor, sagging follows. The housing stock explains a lot of what we see: pre-war bungalows with narrow original gates, mid-century ranches in Norview, and tract homes in Ocean View where the gate is often the same age as the driveway it crosses.
Water is the other half of the story. In Ocean View and other low-lying areas, nor’easters and hurricane-season flooding push tidal water across yards, and gate posts heave as the soil shifts and dries. Wooden gates swell in the summer humidity and warp by fall. Older iron fences near the floodplain often need rust treatment and a check on how the installation sits relative to floodplain rules, so we look at siting before we sell hardware. None of this is guesswork; it’s the pattern that repeats across Norfolk.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Norfolk Services
Two jobs come up more than any other on Norfolk properties: getting an existing gate working again and tracking down a fault in an electric operator.
Gate Repair in Norfolk
Repair on a Norfolk gate usually starts with hardware that the coast has aged: hinges that bind, latches that no longer line up, posts that have moved, and slide tracks packed with grit and debris. We diagnose before we quote, so a gate that looks like it needs a full replacement is sometimes a hinge, an anchor, or a straightened track away from working properly. Wooden gates that have swelled get adjusted rather than forced. If you’re dealing with a gate that drags, sticks, or won’t close cleanly, our Gate Repair in Norfolk page covers the common causes and how we handle them.
Electric Gate Repair in Norfolk
Electric gates here fight moisture and power problems more than anything else. Control boards corrode, loop detectors get triggered by standing water, and limit switches drift out of adjustment as posts settle. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, and we test the motor and the control board together rather than swapping parts until something works. If your gate opens halfway and reverses, or the remote has stopped responding, the Electric Gate Repair in Norfolk page walks through what we check.
Gate Installation in Norfolk
Installing a gate in Norfolk means planning for water, salt, and soil movement from the first post hole. In Ghent and Colonial Place, that often means matching a new gate to pre-war ironwork and a narrow setback; in Ocean View, it means setting posts to proper footing depth so tidal flooding doesn’t heave them, and choosing finishes that survive salt air. We handle the whole job through our Gate Installation service, from measuring the opening to handing over working remotes. If you want a single call to cover the gate, the operator, and the safety edges, this is where it starts.
Driveway Gate Installation
Signs you need it
You need a driveway gate when the existing opening has no gate, when the current gate is too far gone to repair economically, or when a new driveway layout leaves the old gate in the wrong place.
What it costs in Norfolk
A driveway gate installation in Norfolk typically runs $2,500 – $8,000 depending on width, material, and whether an operator is included, with the written estimate setting the final figure.
How we do it
We measure the opening and check the ground and drainage, set posts to proper footing depth, hang the gate, then fit the operator, safety edges, and access controls if the job includes them.
Electric Gate Installation
Signs you need it
An electric gate makes sense when you’re tired of getting out to open a manual gate, when you need controlled access for an HOA or small commercial lot, or when an old operator has reached the end of its service life.
What it costs in Norfolk
Electric gate installation in Norfolk typically falls between $3,500 and $12,000 for the gate and operator together, depending on gate type, brand, and the power run, with the written estimate setting the final price.
How we do it
We size the operator to the gate, run the power and low-voltage control lines, mount the operator, set the limit switches, and test the safety edges and loop detectors before we hand over remotes.
What Gate Installation Costs in Norfolk
| Item | Typical range in Norfolk |
|---|---|
| Driveway gate installation | $2,500 – $8,000 |
| Electric gate installation (gate and operator) | $3,500 – $12,000 |
| Operator, controls, and safety edge package | $1,200 – $4,500 |
Do I need a permit to install a gate in Norfolk?
Often yes, especially when the gate sits near a property line, in a floodplain, or involves new electrical work. Check with the city’s building department and your HOA before ordering; we’ll tell you what the job involves so you can ask the right questions.
Can you install a gate on a property that floods?
Yes. In low-lying areas like Ocean View we set posts to proper footing depth, choose finishes that handle salt and water, and plan drainage around the opening. A free measure tells us what your ground is doing before we commit to a design.
Brands We Service in Norfolk
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, from common residential openers to harder-to-find commercial-grade systems. We don’t stock parts, but knowing the brand and model up front means we source the right component on the first call instead of guessing. See our brands for the full list and what we handle on each.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Norfolk, VA
| Service | Typical range in Norfolk |
|---|---|
| Gate repair (hinges, latches, posts, tracks) | $150 – $650 |
| Slide gate track and roller repair | $250 – $900 |
| Rust treatment and gate refinishing | $200 – $800 |
| Electric gate repair (motor, control board, limits) | $250 – $1,100 |
| Loop detector or safety edge repair | $200 – $700 |
| Operator replacement | $900 – $3,500 |
| Driveway gate installation | $2,500 – $8,000 |
| Electric gate installation (gate and operator) | $3,500 – $12,000 |
| Operator, controls, and safety edge package | $1,200 – $4,500 |
In Norfolk, price climbs with material choice, salt-rated finishes, footing depth in soft or flood-prone ground, and whether the job includes a full power run for an electric operator. Every price above is an estimate, and we quote and agree the figure in writing before any work starts, so the invoice matches what you approved.
Neighborhoods We Serve in Norfolk
We install and service gates across Norfolk, from the historic streets of Ghent and Colonial Place to the mid-century blocks of Norview and the waterfront homes of Ocean View. The work is the same everywhere in the city: salt, water, and old hardware. Response across Norfolk is generally same-day when you call during dispatch hours. ZIP 23503 and the surrounding areas are well within our normal coverage.
- Ghent
- Colonial Place
- Norview
- Ocean View
- Downtown Norfolk
Service Area – Cities Near Norfolk
Norfolk sits in the middle of Hampton Roads, so we also cover the surrounding cities. If you’re just across the water in Hampton, VA, up the peninsula in Newport News, VA, or out toward the rivers in Mathews, VA and Gloucester Courthouse, VA, we can help. Our home base and the widest coverage sit around our Gate Repair Newport News service, and Norfolk jobs are scheduled the same way.
Serving Norfolk, VA – Our Local Coverage Area
We serve Norfolk and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Norfolk
For most Norfolk addresses we can dispatch same-day when you call during operating hours. Call (866) 620-2654. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
We can’t approve anything on the city’s or an HOA’s behalf, but we’ll tell you what the installation involves so you can ask your HOA and the city building department the right questions before work starts. Floodplain siting and property-line setbacks are worth checking early.
We cover all of Norfolk, from Ocean View and Ghent to Norview and downtown, plus the surrounding Hampton Roads cities. If you’re unsure whether your address is in range, call (866) 620-2654 for a free estimate and we’ll confirm.
Whether you need a gate repaired, an operator diagnosed, or a brand-new gate installed, call (866) 620-2654 for a free estimate. We’ll measure, quote in writing, and agree the price before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Norfolk Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Tiana Whitfield"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Latoya Freeman"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Emily Yang